Products
Products
To view our selection of products click on one of the categories to see more.
Aluminum
Angles
Aluminum angels are great at resisting moisture and are strong for their light weight. They weld well with proper equipment and are easy to drill, saw, and punch. They can be used as braces, frames, and brackets.
- Grade – 6061
- Sizes – Width – ½” – 6”, Thickness – ⅛” – ½”
Aluminum Hex
- Grade – 6061
- Size – ⅜″ – 2 ½”
Channel
An Aluminum Channel is a product with sharp right angle inside and outside corners making this shape ideal for many trim applications. Aluminum Channels are widely used for various types of fabrication where weight and corrosion resistance are a primary concern.
- Grade – 6061
- Sizes – ¼” – 6”, Thickness – ¹⁄₁₆” – ¼″
Expanding Mesh
- Grade – 6061
- Size – ⅜″ – 2 ½″
Flat Bars
Aluminum Flat Bars offer good workability and high corrosion resistance. Flat Bars are widely used in aircraft structures, especially wing and fuselage structures under tension.
- Grade – 6061
- Width – ½” – 12”, Thickness – ¹⁄₁₆” – 2″
Hollow Square / Rectangular Bars
Hollow Aluminum Bars are used mostly for structural parts, containers, and piping. They are corrosion resistant and good for bending rolling, and welding
- Grade – 6061
- Sizes – ⅝” – 6”, Thickness – ¹⁄₁₆” – ⅛”
I-Beams
Aluminum I-beams are the standard shape for aluminum beams used in floor and ceiling joists. I-beams have a yield strength PSI of 40,000. Aluminum I-beams come in a variety of sizes for all types of jobs, from 3-by-2 to 12-by-14 feet.
- Grade – 6061
- Sizes – Height – 3” – 5”, Thickness – 3⁄16”
Pipes
Aluminum Piping has high strength, good workability, and high resistance to corrosion. Uses include railings, irrigation pipes, and transportation.
- Grade – 6061
- Sizes – Width ⅛” – 6”, Sch 40 and Sch 80
Solid Round Bars
Aluminum Solid Bars are perfect for a variety of uses and are available in many different finishes. They are widely used in electronic, instrument, medical, spinning machine, aviation, shipping, machinery industries and other fields.
- Grade – Grade 6061
- Sizes – ¼” – 6”
Solid Square
Aluminum sheets have good workability, a high fatigue strength and are very good for welding. Aluminum sheets can be harder or softer depending on their their thickness.
- Grade – 6061
- Size – ⅜″ – 4”
Sheets
Plain
Aluminum sheets have good workability, a high fatigue strength and are very good for welding. Aluminum sheets can be harder or softer depending on their their thickness.
- Grade – 1050, 5083, 6061
- Sizes – 4’ x 8’, Thickness – 0.7mm – 1 ¼”
Diamond Cut
Aluminum Diamond Cut Sheet, sometimes called aluminum tread plate, aluminum floor plate, or aluminum checker plate is a metal stock that has a pattern of diamonds on one side. It is mostly used for stairs and walkways as it reduces slipping.
- Grade – Grade 1050
- Colours – Black, Orange, Yellow, Red, Blue, Silver
- Sizes – 4’ x 8’, Thickness – 0.7mm – ¼″
Tubing
Aluminum Tubing can be used for many types of applications. It can be bent to a desired shape and cut to desired length.
- Grade – Grade 6061
- Diameter – ⅛” – 8”, Thickness – ¹⁄₁₆” – ½″
Brass
Flat Bars
Brass Flat Bars are used for wear strips, model making and other decorative uses. It can be easily soldered and brazed and provides good resistance to corrosion.
- Grade – Grade 360HH
- Width – 1” – 4”, Thickness – ⅛” – 1″
Hex Bars
Brass Hex Bars are easily drilled, machined and sawed. Uses include base plates, decorative work, braces and housewares.
- Grade – Grade 360HH
- Diameter – ⅜” – 2″
Pipes
Brass Pipes serve various industries like petrochemical, ship-building, and power plants. They an be used in heaters, vent condensers, water heaters, and condensate coolers.
- Grade – Grade 360HH
- Sizes – ¼” – 1 ½”, SCH 40
Sheets
Brass Sheets offer good corrosion resistance to many chemical corrodents as well as industrial environments.
- Grade – Grade 360HH
- Size – 3’ X 6’, Thickness – 0.55mm – 6mm
Solid Round Bars
Brass Solid Round Bars are ideally suited for applications where strength, good corrosion resistance, electrical conductivity, and non-sparking characteristics are important.
- Grade – Grade 360HH
- Sizes – ¼” – 4”
Solid Squares
Brass Solid Squares are good for applications where strength, good corrosion resistance, electrical conductivity, and non-sparking characteristics are important.
- Grade – Grade 360HH
- Size – ¼” – 1 ½”
Tubing
Brass Tubing has a wide range of applications, such as support sleeves, couplings, bushings, connectors, fittings, circuit board relays, electronic components, switches, valve stems and valve components, pump shafts, brackets, frames, fixtures, and ornamental works.
- Grade – Grade 360HH
- Size – ¼” – 2 ½”
Bronze
Cored Bronze (Hollow)
Cored Bronze Bars are self-lubricating and can work in high temperatures from about 10°F to 220°F. They are corrosion resistant and non-megnetic.
- Grade – Grade SAE 660
- Size – 1 x ½” – 8” x 4”
Solid Round Bars
Bronze Solid Round Bars can be used for bearings, bushings, gear parts, valve parts, and marine hardware.
- Grade – Grade SAE 660
- Size – ½” – 4”
Bright Mild Steel
Hex Bars
Bright Mild Steel Hex Bars has rust free nature, flexibility, high durability, and weld ability. They are most often used in the automotive industry, steel industry, and construction industry.
- Grade – 230M07
- Size – ⅜” – 2 ½”
- Size – 10mm – 65mm
Solid Round Bars
Bright Mild Steel Solid Round Bars are mainly used for engineering component, forging industries, foundation bolt, and shafting.
- Grade – 1018CF
- Size – 3⁄16” – 6”
- Size – 4mm – 55mm
Solid Square Bars
Bright Mild Steel Solid Square Bars are mainly used for engineering component, forging industries, and grill fencing.
- Grade – 230M07
- Size – 3⁄16” – 3 ½”
- Size – 4mm – 65mm
Tubing
Bright Mild Steel Tubing can be easily cut, drilled and welded. It is usually used to make frames, furniture and general fabrications.
- Grade – EN 10305-1 / E 235+C
- Diameter – ⅛” – 6”
- Thickness – ¹⁄₁₆” – ½”, 1.5mm – 3.25mm
Copper
Flat Bars
Copper Flat Bars are great for processing techniques and have great corrosion resistance. They are a non magnetic material with high conductivity rating
- Grade – Grade C101
- Size – Width – 1”- 4”, Thickness – ⅛” – ½”
Sheets
Copper Sheets can be used for any residential or commercial project. Copper Sheets can be used by fabricators, contractors, roofers and home owners.
- Grade – Grade C101
- Size – .55mm – 4mm
Solid Round Bars
Solid Round Bars are usually used for bus bars, feed stock for precision-machined electrical components, nozzles, fittings and forging stock.
- Grade – Grade C101
- Size – ¼” – 2 3⁄4”
Cast Iron
Cored Bars
Cast Iron Cored Bars have high density, zero deficiency, and easy cutting. They are used for sealing rings, clamp rings, oil drilling, air compression machines, cylinder liner, pistons rings, and engine cylinders.
- Grade – GR 250
- Sizes – 4 x 2” – 6 x 3”
Solid Round Bars
Cast Iron Solid Round Bars are used mainly for air conditioning compressor rings, hydraulic valve cores, pump gears, bearing rings, seals, bushings, spacers, and gears.
- Grade – 250
- Sizes – 1” – 8 ½”
Chrome Steel
Solid Round Bars
Chrome Steel Solid Round Bars are ideal for is ideal for highly stressed parts. They have excellent non-distorting properties for an alloy steel, with high fatigue/tensile ratio and the capability to maintain strength, ductility, and toughness at relatively high temperatures.
- Grade – EN19/4140
- Sizes – ¼” – 2 ½” / 6mm – 150mm
Miscellaneous Items
Bolts Nuts
At Lo-Tec Machinery Supplies we carry a wide range of quality bolts and nuts. From carriage bolts and hex head bolts to coupling nuts and square nuts we have it all.
Bushings
Lo-Tec Machinery Supplies have the drill bushings help you drill more precise holes and which will last longer.
Chain
If you have a large load that you need to move, you will most likely need a strong chain to do so. Lo-Tec Machinery Supplies will have the right chain for you to get the job done.
Drill Bits
If you need an extension to you drill Lo-Tec Machinery Supplies has a great selection of drill bits to satisfy your needs.
Hoses and Hose Clamps
Lo-Tec Machinery Supplies has wide range of hoses along with hose clamps with key-type adjusters.
Single Groove & Double Groove
Single and Double Pulleys are well suited for handling the often complicated technical hauling systems required for safely and efficiently raising heavy loads.
Springs
Whether you need compression springs or extension springs, you can find it at Lo-Tec Machinery Supplies.
Sprockets
Sprockets are special wheels with teeth that are made to mesh and conform with a belt or chain. They are used to control movement of the belt or chain with precision.
Mild Steel
Angles
Mild Steel Angles are used for making frames, racks and most general fabrications. Mild Steel Angles can be easily cut, drilled, machined and is particularly suited to welding.
- Grade – A36
- Width – 1” – 4”
- Thickness – ⅛” – ½”
Flat Bars
- Grade – A36
- Width – ½” – 6”, 25 – 150mm
- Thickness – ⅛” – 1”, 3 - 50mm
C - Channel
- Grade – A36
- Size – 2”- 4”
- Thickness – ⅛” – ¼”
Reguar Hollow Section
- Grade – A36
- Size – ¾” – 4”
- Thickness – ⅛” – ¼”
Pipes
Mild Steel Pipes are used for structural purpose and mechanical & general engineering purpose. They are also used for drinking water supply and the use of chlorination and sodium silicate inhibit corrosion in mild steel pipes.
- Grade – A53
- Diameter – ⅛” – 6”
- Thickness – Sch40, Sch 80, Sch 160
Plastics
Acrylic » Sheets, Solid Round Bars, Tubes
Acrylic thermoplastics have good strength, weather resistance, high transparency, corrosion resistance, and are lightweight. They are used in toys, light fittings, safety shields, and other machinery.
- Diameter – ½ - 1 ½”
Delrin » Solid Round Bars
Delrin has many of the same characteristics of industrial metals such as brass, aluminum, zinc, and stainless steel. Delrin is a homopolymer acetal (POM). Some of Delrin’s comparable properties include stiffness, dimensional stability, impact resistance, and structural strength.
- Colour – Black, White
- Diameter – ½” – 6”
Fibre Sheets (Bakerlite)
Fibre Sheets are made from a polymer made of plastic reinforced with fibers. They are lightweight and strong, moisture resistant, flexible, easily cleaned, and chemical resistant.
- Thickness – ¹⁄₁₆ - 2”
- Dimensions – 4’ x 4’
Polycarbonate Lexan » Sheets
Lexan Sheets with a thicknesses of .125″ will transmit 86% of the light. Lexan Sheets are UV stabilized and has a heat deflection temperature of 270°F
Nylon » Black and white: Solid Round Bars and Sheets
Nylon is on of the most widely used plastics in the world. It is often used to replace bronze, brass, aluminum, steel and other metals. It has high impact resistance. It also resists wear, abrasion, and vibration.
Nylon Round
- Size – ½” – 6”
- Color – Black, White
Nylon Black Sheet
- Thickness – ½” – 2”
- Dimensions – 2’ – 4’
Polycarb Tubes
Polycarb Tubes are perfect for applications including sight glasses, medical devices, electronics packaging, LED tubing, flow lines, and more.
PVC » Solid round bars, Pipes
Polyvinyl Chloride (PVC) provides great machining and fabrication characteristics for components used in corrosive environments. The use of PVC can provide cost savings with well balanced physical properties for many applications.
PVC Solid Round (Grey)
- Size – ½” – 4”
PVC SCH 40 PIPE (Grey)
- Size – ½” – 4”
- Grade – SCH 80
Teflon » Sheets and Solid Round Bars
Teflon is a non-stick plastic often used for cookware, containers, and pipe work. It has great resistance to chemicals and stand up to temperatures of 500°F.
Teflon Solid Round
- Size – ¼” – 6”
Teflon Sheet
- Thickness – 1⁄32” – 1”
- Size – 2x2’
UHMW (white hard plastic) » Sheets, Square Bars, Flat Bars, and Round Bars
UHMW is ultra high molecular weight (UHMW) polyethylene bar that has exceptionally high abrasion and impact resistance properties. It will outwear all other materials, including metals, nylons, urethanes and fluoroplastics.
UHMW Rectangle Bar
- Width – 1-4”
- Thickness – ¼ - 2”
UHMW Round
- Diameter – ½ – 6”
UHMW SHEET
- Thickness – ⅛” – 2”
- Size – 4’ x 4’
UHMW SQUARE BAR
- Size – ½ x ½ – 2x2
Urethane (black rubber) » Round Solid Bars
Urethane Solid Bars are often used for metal forming, press brakes, jigs & fixtures machined to fabrication specifications, and bumpers.
- Size – ¾” – 4 ½ ”
Stainless Steel
Angles
Stainless Steel Angles have good corrosion resistance and are mostly used for bracing, brackets, and structural support.
- Grade – 316
- Sizes – 20 – 100mm
- Thickness – 3 – 10mm
C - Channel
- Grade – 316
- Sizes – 2” – 4”
- Thickness – ⅛ – ¼”
BRC Mesh Sheets
BRC Mesh Sheets have many uses including poultry houses, egg baskets, draining racks, runway enclosures, safety guards, animals pens, and construction.
- Grade – 316 / 304
- Sizes – ¼ x ¼” – 2 x 2”
Expanding Mesh Sheets
Stainless Steel Expanding Mesh Sheets are typically used for screening, ventilating or security. The openings permit passage of light, air, heat and sound, and sheet is lightweight and easy to fabricate and form.
- Grade – 304
- Sizes – ½” – 1 ½”
Flat Bars
Stainless Steel Flat Bars are usually used for brackets, sculptures, bracing, trim, and shelves. They have good corrosion resistance and have sharp defined edges.
- Grade – 316
- Width – 12- 150mm
- Thickness – 3 – 12mm
Hex Bars
Stainless Steel Bars have good resistance to wear and tear. Hex Bars are usually used in cement plants, fertilizer plants, and petrochemical industries.
- Grade – 316
- Sizes – ½” – 2”
Hollow Square Bars
Stainless Steel Hollow Square Bars are usually used in petroleum, chemical, paper, machinery, shipping , medicine, and other industries.
- Grade – 316
- Width – 20 – 100mm
- Thickness – 1.5 – 6mm
Solid Round Bars
- Grade – 316
- Size – ⅛” – 6”
- Size – 4mm – 50mm
Pipes
Stainless Steel Pipes are used in construction, food industry, pharmaceutical industry, automotive industry, and decorative purposes.
- Grade – 316
- Diameter – ⅛” – 6”
- Thickness – Sch 10, Sch 40, Sch 80
Sheets
Plain
Stainless Steel Sheets are used when corrosion resistance is a requirement. They are widely used in the food, gas, biology, chemical, petroleum , medical equipment, and electrical industry.
Perforated Sheets
Stainless Steel Perforated Sheets are used mainly for screens, diffusers, guards, ventilation, and decoration. They are lightweight, economical, and can be customized fairly easily.
- Grade – 316
- Thickness – 0.7mm – 12mm
- Grade – 304
- Size – 0.5mm – 12mm
Solid Square Bars
Stainless Steel Solid Square Bars are resistant to corrosion and have many applications including shafts, keystock, and jigs.
- Grade – 316
- Size – 3⁄16” – 1 ½”
- Size – 5mm – 40mm
Tubing
Stainless Steel Tubing can be welded or seamless. There are also various diameters of tubing. Tubing can also be straight or coiled.
- Description – 316 Hydraulic
- Grade – 316
- Size – ⅛” – 1”
- Size – 6mm – 28mm
- Description – Decorative (Chrome Finish)
- Grade – 316
- Size – ⅝” – 6”
Hard Chrome
Hard Chrome / Hyrdaulic Shaft
Graphite
Solid Round Bars
Graphite Solid Round Bars have good electrical, mechanical, and thermal properties. They are strong and have good oxidation resistance. They are usually used for electrodes
